Fan 50 Plus PINS 12V DC Universal Ignitor Board Replacement for Fan Control 7912-II 7916-II 7920-II FA 79D HF 80D AFSD12 AFSD16 DFSD12111

Specification：Power Connector Type:6-PinVoltage:12 VoltsWattage:50 wattsCooling Method:AirNoise Level:50 dBMaterial:Alloy Steel, AluminumMaximum Rotational Speed:1500 RPMFlame Failure Response Time:0.8 seconds maximum Tries for lgnition: ThreeOperating Temperature: -40 to + 176°F(-40℃ to +80℃).

• [Fitment]：7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111,DFMD25111,DFMD30111,DFMD35111,DFSD12111,DFSD16111,DFSD20111.
• [Not compatible]: The FAN50 Plus control board should not be used for 900 series furnaces with thermostats in the grounding circuit.
• [Function]: This board can be used to upgrade old furnaces and add fan control functionality. The FAN50 Plus control igniter board is designed to turn off the fan motor when the igniter board fails to detect flames after three ignition attempts. This can reduce battery consumption and avoid unnecessary cold air blowing.
• [Installation]: After turning off the fan motor, the fan 50 Plus pin will wait for 1 hour and then repeat the entire sequence again before permanently turning off.
• [Attention]: The Fan Control function must be used to operate this board correctly.