H801RA;4 Ports Salve LED Pixel Controller;Work withmaster Controller or PC;TTL(SPI) Signal Output(LED Studio)

Digital to Analog Converters1. IntroductionH801RA is a salve controller that transmits data based on Ethernet protocol, the input port is used for receiving data and output port is used for sending data. H801RA controls LED lamps with four output ports. H801RA can be connected to master controller or computer.can not work as standaloneOnline software is "LED Studio software" and offline software is "LED Build Software".2. Supported Driver ChipsLPD6803, LPD8806, LPD6813, LPD1882, LPD1889, LPD6812, LPD1886; APA102, P9813, DZ2809, SM16716; UCS6909, UCS6912, UCS1903, UCS1909, UCS1912; WS2801, WS2803, WS2811, WS2812, INK1003; TM1812, TM1809, TM1804, TM1803; BS0901, BS0902, BS0815, LY6620, BS0825; LD1510, LD1512; TLS3001, TLS3002; DM413, DM114, DM115, DM13C, DM134, DM135, DM136; MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, 74HC595, 6B595, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, HEF4094, A8012 etc.Note: H801RA can support more than the chips listed above(some chips have the same sequence diagram, for example: UCS512, WS2821 and DMX512 have the same protocol. UCS2903 has the same sequence diagram with UCS1903, so H801RA supports them all).3. Software download linkWhen H801RA is connected to master controller, software is LED Build.LED Build download: https://drive..com/open?id=0B1gzqyV6hfOgN2pkMV8yMFozYzQLED Build Tutorial Video: https://drive..com/open?id=0B1gzqyV6hfOgUnFjeG9EM3VRZjAWhen H801RA is connected to computer, software is LED Studio.LED Studio download: https://drive..com/open?id=0B1gzqyV6hfOgWFpuM3BoN1VaTGsH801RA to PC tutorial document download: https://drive..com/open?id=0B1gzqyV6hfOgUnBhX2pLeHFvNXM4. Features(1). Four ports drive a maximum of 3412 pixels.(2). H801RA can be connected to mastert controller or computer.we have the below two master controllers:https://www..com/store/product/H803TC-LED-Online-Offline-Master-Controller-for-pixel-lights-need-to-work-with-H801RA-or-H801RC/701799_32380680102.htmlhttps://www..com/store/product/H803TV-DMX-SPI-LIVE-transmission-controller-computer-or-DVI-to-LED-Display/701799_32325799355.html(3). High synchronization performance, the transmission of adjacent slave controller delays within 200 ns.(4). Good control affect. Using a special algorithm to control the disable lamp to 256 levels grayscale and can control the enable lamp to 65536 (64K) levels grayscale.(5). Far transmission distance. The nominal transmission distance of two controllers is 100 meters.Connection Diagram:Brief Software IntroductionLED Build(when controlled by master controller):LED Studio(when controlled by computer):(1). Allocate an IP address for H801RASpecificationsInput Voltage: Power Consumption: 1WDrive Pixels Number: 3412Weight: 1KGDimension: L163 x W155 x H54Carton Size: L205 x W168 X H69==========High-concerned chemical : NoneFeatures : can not work as standaloneModel Number : H801RA-SPIOscillation frequency : 50/60hzConnection Mode : SPIVoltage : 85-265VMaterial : metalWattage : 1Power : ACMax. Load Power : 1WRemote Distance : 10mApplicable Lights : led pixelControled Method : TTL-SPIItem Type : RGB controlerControled Method : by master controller or PCdrive pixels number: : 3412

• Digital to Analog Converters